Search
Menu Close
Menu Close

4-channel 100 W @ 4 ohm or 1-channel 200W@100V

Manufacturer: DAS Audio
1 RU, DIN
  • Quad-channel amplifier delivering 4x100W at 4 ohms efficiency.
  • Switching universal mains power supply for versatile installation options.
  • Auto-standby functionality saves energy when no signal is detected.
  • Bridge mode for high impedance lines, providing 2x200W total power.
  • Configurable rear panel with high pass filter and mode selection.
SKU: INTEGRAL-A404
Availability: In stock
$3,450.00 incl tax
i h

INTEGRAL-A404 is a quad channel, 1U, high efficiency class D amplifier intended for permanent installation use. It is equipped with switching universal mains power supply and auto-standby functionality when no signal presence is detected providing energy savings.

The amplifier delivers 4x100W at 4ohm and can be used in bridge mode for high impedance 100V/70V lines (providing 2x200W of total power). Front LEDs provide information about signal presence, limiters and protection status. At the rear panel the user can configure the stereo / bridge mode and engage an 80Hz 12dB/oct order High Pass filter.

Features

4 channel amplifier, Class D
4 independent inputs
100 W per channel @ 4 ohms
Low Z and High Z (Bridged 70 V/100 V) operation
Hybrid configuration operation (Hi Z and Low Z)
Universal Power Supply
12dB/oct 80Hz HPF filter Selector (on/off)
Automatic Stand-by mode

Output Power Ratings
Power 8 Ohms, Both Channels Driven4 x 50 W
Power 8 Ohms Bridged2 x 200 W
Power 4 Ohms, Both Channels Driven4 x 100 W
Power 100 V2 x 200 W
Power 70 V2 x 200 W
Electronics and Connectors
Amplifier Channels4
Output CircuitryClass D
Frequency Response20 Hz-30 kHz (+0 – 0.5 dB)
Sensitivity1.38 V (5 dBu)
Voltage gain30 dB
Damping Factor> 1000 (8 Ω load, 1 kHz and below)
ControlsPower On/Off, Gain Pots
CoolingSide-Right-to-Left
Amplifier ProtectionsShort Circuit, DC Output, Temperature, Over/Under Voltage
LED IndicatorsOn-Protect-Standby, Signal-Clip
Audio Signal Input ConnectorTerminal Block
Speaker Output ConnectorTerminal Block
Current Draw 230 V / 115 V1.5 A / 3.0 A
Dimensions-Weight
Dimensions ( H x W x D )44 x 483 x 208 mm
1,7 x 19,0 x 8,2 in
Net Weight2,9 kg ( 6,4 lb )
Shipping
Carton Dimensions ( H x W x D )130 x 525 x 315 mm
5,1 x 20,7 x 12,4 in
Shipping Weight3,5 kg ( 7,6 lb )
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*