Search
Menu Close
Menu Close

60 watt Public Address Amplifier Mixer, 4 Mic, 4 Aux

Manufacturer: ITC
60 watt 100V/4 ohm Public Address Amplifier. 230v plus 24VDC
  • 2U mixer amplifier with 70V, 100V, and 4-16 ohm outputs.
  • Four universal balanced XLR mic inputs with phantom power available.
  • Built-in pre-announcement chime with volume control and remote trigger.
  • Protected against short circuits, thermal overload, and overloading issues.
  • Includes multiple volume controls for mic, aux, master, treble, and bass.
SKU: T-60FP
Availability: Low stock
$649.00 incl tax
i h

This FP series PA amplifier (T-60fp or T-120fp) is a 2U mixer amplifier featuring 70V, 100V and 4-16ohm speaker outputs & 4 universal balanced XLR mic inputs with phantom power.

There are 4 audio source selectors on the front panel, and 4 Aux inputs via dual RCA connectors are located on the rear panel.

Mic 1-4 have Vox priority selectors. The amplifier also has a built-in pre-announcement chime with volume control and remote chime trigger. The REC output is for recording or slaving to another amplifier and PRE output, AMP input for adding extra signal processor like a mixer or graphic equalizer for example. Volume control over Mic1-4, aux, master & overall treble/bass controls are provided.

These public address amplifiers are completely protected against damage from short circuit, thermal overload, and overloading.

Features

  • 2U tabletop and rack mount design
  • Rated power output from 60W to 120W (T-60 and T-120fp)
  • 4 balanced XLR microphone inputs with phantom power and gain control
  • 4 dual RCA line inputs * 70V, 100V and 4-16ohm speaker terminals
  • Mic 1-4 with selectable priority over other inputs
  • Built-in chime, 2/4 tone selector and remote trigger
  • XLR balanced line output for extra power amplifier
  • REC output for recorder or driving another zone
  • PRE Output and AMP input for extra signal processor
  • Master, Mic1-4, Aux volume control, treble and bass control
  • Indicators include power and output level meter
  • AC 220~240V and DC 24V operation
  • 484x335x88mm 7.5kg

A fully featured 60 watt Public Address amplifier featuring 70V, 100V and 4-16ohm speaker outputs & 4 universal balanced XLR mic inputs with phantom power.

MIC 1~4 can be set to override other input signals with 30 dB attenuation, simple to setup and adjust on the rear panel "MIC PRIORITY" switch.

The cooling fan only starts up if the temperature gets to 55 deg C. The amplifiers can also operate on 24V DC from emergency power and evacuation systems (see our T-6247 evacuation controller which can interface to your alarm system too).

This quality PA Amplifier come with a 3 year factory warranty so you can specify and use this amplifier with confidence.

484x335x88mm 7.5kg

0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*