Netbell MIC-608G IP Call Station with Gooseneck Mic

MIC-608G IP Desk Microphone station with gooseneck microphone

The Netbell-MIC-608G IP call station with gooseneck microphone comes with a high-performance microphone, built-in 2W audio power amplifier and matching speakers, 1 line output, 3 buttons, supports broadcast, intercom, unicast, full broadcast, etc., it can be used to page up to 3 zones/endpoints. You can install multiple call station on the network to make live announcement facility-wide.

To use this IP call station to build a facility-wide mass communication system, you can pick one or many speakers that fit your needs from the featured products below to build your custom paging system

Important Requirements

To achieve the best audio quality for your IP paging system, we recommend building a dedicated VLAN for this system with network equipment compatible with multicast protocol. Netbell IP paging devices support PoE/PoE+, and a properly configured network infrastructure will ensure a smooth installation.

• The speakers and the PC running the NACT desktop app must be on the same LAN
• Network and Switch Requirements:
  • Power over Ethernet (PoE/PoE+) Switch Ports
  • Minimum CAT5 cable with maximum of 100 meters from the device to switch
  • Network switch capacity to handle power loads for all devices
  • Router: Must support IGMP (Internet Group Management Protocol) and PIM (Protocol Independent Multicast)
  • Switch: Must support IGMP snooping