Search
Menu Close
Menu Close

Power Amplifier: 2x700W @ 8ohms, 2x1400W @ 2ohm

Manufacturer: Audiocenter
Stereo audio amp for fixed installation music systems
  • 700 watts RMS at 8Ω, handling 2Ω loads for powerful performance.
  • Clear sound quality with a high damping factor for critical monitoring.
  • A-Guard Protection System ensures reliable operation under various conditions.
  • Smart Overheat Management reduces power, maintaining performance in high temperatures.
  • Class H+ Circuit Design minimizes distortion for a natural sound experience.
SKU: PRO7.0
Availability: In stock
$1,599.00 excl tax
i h

The Audiocenter PRO7.0 offers 700 watts RMS at 8Ω stereo with each channel capable of  handling 2Ω loads.

Very clear and clean sound and high damping factor makes PRO7.0 suitable for any application, from high powered loudspeakers to critical monitoring where very high spec performance is mandatory.  Equally at home in fixed installations, touring racks, and any performance venues such as bar, nightclub, multi-functional hall, museum, religious venue, commercial site, lecture hall, wedding ceremony, etc.

Features

  • A-Guard Protection System

A-Guard is Audiocenter's comprehensive protection system which includes optimized limiter circuit. Unlike other solutions which depend on separate circuits to address different problems, A-Guard was developed as centralized solution where all protection mechanisms work together and are only sparingly applied when it’s necessary to protect the amplifier. This is the reason why PRO amplifiers are able to sustain full power output even under complex capacitive and low impedance loads.

  • Smart Overheat Management

The smart overheat management of the PRO series monitors the amplifier’s temperature in real time. When the safe operation of the amplifier is compromised, the output power is reduced (not shut down), which ensures the system continues to work in high temperatures.

  • Class H+ Circuit Design Eliminates Cross Switching Distortion

The PRO series features the latest Class H+ circuit to eliminate the common (in other brands) Class H cross switching distortion. The result is the same low distortion as Class AB topology. All PRO amplifiers have less than 0.05%THD at 16KHz and the sound is clean and natural.

Specifications

Output power(1kHz, THD+N =1%)

2×700W@8Ω stereo

2×1100W@4Ω stereo

2×1400W@2Ω stereo

2200W@8Ω bridge

2800W@4Ω bridge

A-Guard Protection System

DC protection,Short circuit protection,Smart overheat management,Overheat protection,Input overload protection,Output overload protection,Soft startup protection,Limiter protection

Working mode

Stereo/Parallel/Bridge

Crossover

/

LOW FREQ ENHANCED

/

Input Connectors

Male XLR & Female XLR

Output Connectors

Speakon 4Pin

Input Impedance

Balanced 20kΩ / Unbalanced 10kΩ

Maximum input voltage

≥20dBu

Sensitivity

0.775V / 36dB / 32dB

Frequency Response(1W 8Ω stereo)

20Hz-20kHz(±0.5dB)

Crosstalk(1kHz, Rated power 8Ω,A weighted)

≥65dB

S/N Ratio(1kHz & 8Ω))

≥108dB

Damping Factor (1kHz & 8Ω)

≥500

Intermodulation Distortion(60Hz:7kHz=4:1,half power)

≤0.05%

THD+N(1kHz,8Ω half power A weighted)

≤0.05%

Output Circuitry

Class H+

Power Supply

110V~/230V~(±10%,50/60Hz)

Power Consumption ((1/8 output power 4Ω)

782W

Rack Space

2U

Cooling

Back to front venting, mandatory cooling

Dimension (W×H×D)

483×88×451mm

Net Weight

22.5kg

0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*