Search
Menu Close
Menu Close

8 CH Matrix with high-performance integrated DSP

Manufacturer: DAS Audio
4 in, 8 out, 4x4 Dante
  • Half rack mount design fits easily into any installation setup.
  • Includes 4 analog inputs and 8 analog outputs for versatile connectivity.
  • DANTE digital audio chipset enables seamless digital audio routing.
  • Intuitive OLED display and control knobs for easy navigation and monitoring.
  • Supports WiFi and Bluetooth for direct wireless operation capabilities.
SKU: INTEGRAL-M88
Availability: In stock
$3,299.00 excl tax
i h

INTEGRAL-M88 is a half rack mount 1U size installation matrix with 4 analog input channels and eight analog output channels. Besides the analog audio inputs and outputs, a DANTE digital audio 4×4 chipset is included by default with the units. Control, configuration and management of the devices shall be done via ALMA software over IP or using Open Sound Control (OSC) protocol.

Priority capabilities, full matrix and routing options make this unit essential as the ”brain” of any type of installation. The internal memory resources allow to store more than 100 “global presets” and more than 200 “output channel presets” (speaker presets). A bank of output channel presets with specific processing parameters for all DAS Audio speakers is included allowing the users to configure each channel independently. For instance, it would be possible to recall for output 1 the preset of Q-23T, for output 2 the preset of Arco-4T, for output 3 the preset of Q-10 etc.

The unit includes an OLED display (1.54”) with control knobs for intuitive and easy navigation as well meters to monitor signal levels. Basic parameters can be accessible via front panel control knobs; input and output levels, global preset recall, output channel preset recall, mute, source selection, link manager functions, priority enabling etc.

Two of the analogue inputs can be switched to microphone with 12V Phantom power if needed.
The unit also Integrates an Ethernet Switch for daisy-chain connections. No external switch is needed.
WiFi and Bluetooth are available for direct wireless operation.

 

Features

8 CH Matrix with high-performance integrated DSP
4 independent analog inputs
2 inputs with selectable MIC/Line option and phantom
8 Analog output channels
4 x 4 CH DANTE digital audio
ALMA management control and monitoring
Priority assignment
Input and output flexible routing

Electronics and Audio
Frequency Response20 Hz-30 kHz (+0 -0.5 dB)
Max Input Level+22 dBu
Max. Output Level+22 dBu
ControlsPower On/Off, Navigation Knobs
Phantom Power+ 12V DC
Sampling Rate48 kHz
DisplayOLED 1.54″
CoolingSide-Right-to-Left
LED IndicatorsOn, Comms, Signal, Protect
Connectors
Analog Audio Input ConnectorsEuroblock 5mm
Analog Audio Output ConnectorsEuroblock 5mm
DANTE Digital In/Out Connectors2 x RJ45 Fast Ethernet
Power
AC Input ConnectorIEC 15A
Power SupplyUniversal Mains Switch Mode
Operating Range90 – 250 VAC
DSP
Analog Input Channels4
Analog Output Channels8
DANTE Input Channels4
DANTE Output Channels4
AD Converters24 Bit @ 48 kHz 125 dBA Dynamic Range
DA Converters24 Bit @ 48 kHz 125 dBA Dynamic Range
Internal Precision32 Bit Floating Point
Latency1 ms
Delay120 ms per output
EqualizerBell, Lo/Hi-Shelving, Hos
CrossoverLinkwitz-Realy, Butterworth
High and Low Pass FiltersUp to 48 dB/oct
LimitersRMS, Peak
Dimensions-Weight
Dimensions ( H x W x D )380 x 360 x 48 mm
14,9 x 14,2 x 1,9 in
Net Weight6,2 kg ( 13,7 lb )
Shipping
Carton Dimensions ( H x W x D )440 x 400 x 60 mm
17,3 x 15,7 x 2,4 in
Shipping Weight7,5 kg ( 16,5 lb )
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*